What is an LED flasher?
LED flasher is a circuit that makes LEDs flash on and off contineously. This is done by giving a + voltage and 0 voltage with a controller box. Various controller boxes can do this, and give various patterns. .
You can also make your own flasher boxes with some circuitry, however we recommend you buy a off the shelf unit. Making your own will be complicated and consist of various: Resistors, Capacitors and Transistors. With a little search on google you can get diagrams to make your own. Be prepared to spend alot of time and about the same money as just buying a flasher box.
Recommended LED flasher:
3 Flash pattern LED flasher with 2 outputs.
- 12 VOLTS
- Dimension 3"X2.25"X.5"
- DRAWS LESS THAN 600 mA
- OVER 5 FEET INCOMING WIRE
- OUTGOING WIRE 5 INCHES
- A. BOTH LINES FLASH TOGETHER
- B. ALTERNATE FLASHING
- C. FOUR FLASHES PER SECOND ALTERNATING
Can flash 100 LEDs 5mm or 8mm
$29.99 FREE SHIPPING SHIPS WITHIN USA ONLY
LED flasher uses included police lighting, emergency light and warning lights. Any 12V led product can be made into a cheap alternative to police lighting systems sold. From police to emergency use, there are alot of uses for flashing leds.
MINI LED Flasher:
12V Flasher Box 1 inch x 1.25 inch 4 Flashes/sec ( F F F F pause F F F F pause etc... 12V DC IN and 12V DC OUT FOR ALL LED PRODUCTS! Connect input to 12V source such as a car battery or wiring. Connect output to your LED product that runs from 12V
$22.99 FREE SHIPPING SHIPS WITHIN USA ONLY