Motorcycle LED Kit Installation
Motorcycle LED Kit Installation Instructions
Locate your battery. You will need to run a wire to your battery for power delivery to the lights. The only reason you would connect these lights directly to the battery would be if you want to use the switch and have the lights turn on when the bike is also off as well. Some may want this, some may want to have the lights on only during riding or when the bike is on. If you only want it on when the bikes lights are on, then you don’t need the switch or the battery. You would need to simply wire these to the tail light wire or to the headlight wire. You simply strip a bit of the wire off those wires and wire the LED directly to them.
If wiring to the battery, you need one wire on the positive and one wire on the ground. You run this bare wire to where all the LED will be mounted with a switch in between.
If not using a switch you can use a wireless switch which we offer as well.