LED lights
Home | About | LED Products | LED Lighting DIY Help | Contact Us
 
Switch
1 Basic Switch (above)
Switch
1 Blue LED Switch Kit (above)

 

 

LED switch
8 Switches with LED - Various colors sold 8 at a time

 

LED switch

LED switch
Stainless Steel Switch- Top quality!

LED Dimmer - Dim LEDs!

 

 

 

 

 

 

1 Basic Switch

  • Basic switch for wiring electronics/LED to your car
  • Soldering required or special terminals
  • 1 LED switch for $2.99 FREE SHIPPING!


    1 Blue or Green LED Switch Kit

    • Built in Blue LED or Green LED
    • Large easy to press button
    • 3 wire terminals for easy wiring to LEDs
    • 1 LED switch for $4.99 FREE SHIPPING!

     

     

     


     

    8 LED Switches

    • 8 LED switches for wiring electronics/LED to your car
    • Only sold 8 at a time
    • Soldering required or special terminals
    • off/on, push it -- on, push it again-- off.  3v-3.6v for the led. LED lights can be lighted up all the time or only lighted up when is " on" 
    • 6A/125VAC.   3A/250VAC
    • CUT SIZE:  15mm/0.6"  DIAMETER
    • 8 switches for $24.99 FREE SHIPPING!

     

    3 LED Switches Stainless Steel

    • 3 LED switches for wiring electronics/LED to your car
    • Only sold 3 at a time
    • Soldering required or special terminals
    • Momentary type stainless steel push buton switch or latching type
    • Version1: SPDT, on-(on), could be used as off-(on) momentary type.
    • Connected one side alternate, push it-connected to another side, release it the 1st side. This is if you want to light up or activate something while you have it pressed.
    • Version2: on/on and off/off latching type working like a normal switch on/off.
    • 12V, 10Amp CE/UL/VDE Approved
    • 18mm outer diameter
    • 3 switches for $65.99 FREE SHIPPING!

     

     

     

     

    LED Dimmer Switch

    This LED Dimmer switch is used on 12 volt systems to dim your leds, it also has an on/off switch all on one knob!

    Simple four wire connection, just connect to your LED's and to your battery power.

    Your pre-wired LEDs and LED circuit boards must already be set up to run on 12 volts, the dimmer will lower the voltage to dim the leds to your desired level.

    The dimmer can be used on other voltage levels from 6 to 33 volts as long as the LEDs are configured to be driven from that voltage. Different LED colors, the LEDs may dim different from color to color.

    DC 12V - MAX 8 Amps

    Please ask if your LEDs will work with this dimmer before ordering. All pre wired 12V single LEDs will work just fine. Our 008 module may not.

    $31.99 FREE SHIPPING!

     

   

Site Map | Dealers | Links | Education Discounts